FITTING ONLY FOR VERTICAL
please ensure you have the following that come with your vertical blind:
EXTRA EQUIPMENT YOU WILL NEED IN
THE PROCESS:
- top fix brackets x2
- face fix bracket x2
- hangers x1
- allan key x1
- stabilising chain x2
- safety hook x1
- wood screw x4
- weight x1
- a pencil
- screws
- drill with the correct bits
- crossed head screw driver
- tape measure (metal)
FACE FIX
You will need to position the brackets approximately 5cm from the ends where the headrail is to be positioned if more than 2 brackets are supplied, fit the additional brackets at equal spacing across the length of the blind. please ensure fixings are suitable for the wall/surface to which you are mounting the brackets.
face fixing hook the back of the headrail into the bracket and rotate the headrail into position. secure headrail by tightening the short screw in the front of the bracket
TOP FIX
You will need to measure the distance and mark down the section to allow for barriers like handles that protrude into the recess area. you will have to locate the brackets approximately 10cm from the ends where the headrail is to be positioned as this will clear the windows handle opener. if more than 2 brackets are supplied, fit the additional brackets at equal spacing across the length of the blind. please ensure fixings are suitable for the wall/surface to which you are mounting the brackets.
Tilt and hook headrail into bracket at point. rotate the headrail into position until it clicks. to release the headrail, push the bracket at point.